No, Gilles, I'm not sleeping. Just see pictures but no explanation what was bought and what it is..
No, Gilles, I'm not sleeping. Just see pictures but no explanation what was bought and what it is..
Just for you Skye.
I bought a flexible mount (see pic) ~ 10 EUROs, saw off the windowholder and put the other end into a aluminum tube ~2 EUROs. Fixed it in there with epoxy resin and with 2 screws ~ both 0,20 EUROs.
With these 2 screws I fixed it then on a aluminum sheet (3mm) ~ 2,5 EUROs which I fixed with 2 screws ~ 0,30 EUROs at the upper windscreen holders.
Now I think your thirst to know is satisfied
Cu somewhen in 2017 in your homecountry or earlier if you join VCIM 18.
Greetings from the south of Germany
Rainer
Thanx Rainer. Tried something similar in the beginning but it didn't fit the way I wanted
Can somebody with the "original" mount tell me if it will also fit with the screen mounted to the lower mounting holes?
I currently have a MRA screen without spoiler mounted as low as possible and I like that a lot so far, definitely don't want to change it upwards as I'm afraid I'll get buffeting in return. So before I spend the cash for the mount it would be useful to know if I can mount it or not.
I made one myself, just like de one in the first post for about 3€ pictures and measurements can you find on this forum.