Author Topic: Tool Kit for CRF1000L (replacing the Honda supplied 'excuse for a tool kit')  (Read 9054 times)

0 Members and 1 Guest are viewing this topic.

james.mc

  • Sr. Member
  • ****
  • Posts: 276
  • Country: ca
  • 2017 CRF1000L DCT
    • Honda-Adventure-Riders
For rear wheel (27mm - right side)

Motion Pro 08-0541 27mm and 12/13mm T-6 Combination Tire Lever/Wrench Set

In another Forum someone suggested that the Motion Pro Spanner/Wrench Tyre lever (above might break) when trying to release the rear wheel nut if it has been torqued to the recommended Torque, which one would normally do. 

I have added to the kit: 27mm Socket and 'T' bar to loosen the 27mm rear nut on the rear right.

I'll try all this stuff out when I get the bike and add further suggestions if I identify any.
regards
James Mc
Honda-Adventure-Riders

Current: 2017 CRF1000L DCT
Current: 2008 Triumph Tiger 1050
Previous: 2003 Honda Varadero XL1000V (bought 2003, sold 2013 - Sadly left behind in Europe)

Jyrays

  • Hero Member
  • *****
  • Posts: 1.487
  • Country: fi
  • Crazy Finn!
Do not forget JIS screwdriver!
Current: HONDA CRF1000L Tricolor DCT
Honda NC700X DCT
Past: Honda VFR 1200 X Crosstourer / Honda SLR 650 / HONDA XLV 1000 Varadero / Honda XR 650 R / KTM 640 LC4 / Honda CB1100 / Yamaha XJ 850 / Honda CB 500 1977...

zebulon

  • Administrator
  • Hero Member
  • *****
  • Posts: 4.160
  • Country: fr
  • 2020 AT Matte Black Metallic

I'll try all this stuff out when I get the bike and add further suggestions if I identify any.

 VCIF_ThumbUp thx James
Alone we go faster, together we go further

I do not ride fast, I ride far

2016 AT Digital Silver - 2011 Shasta white - 2007 Bloom Red - 2001 Candy Phoenix blue