Author Topic: CRF1000L A/D Engine Oil Change  (Read 4086 times)

0 Members and 1 Guest are viewing this topic.

james.mc

  • Sr. Member
  • ****
  • Posts: 276
  • Country: ca
  • 2017 CRF1000L DCT
CRF1000L A/D Engine Oil Change
« on: July 09, 2017, 08:53:10 »
Note.  There are two engine oil drain plugs on the Africa twin.
  • Engine Oil Filter: Honda Part 15410-MFJ-D01 (K&N 204 or 204c)
  • DCT Clutch Oil Filter: Honda Part 15412-MGS-D21
  • Engine oil plug washer: Honda Part 94109-12000  (2 required)
  • Tool Oil Filter Wrench: 07HAA-PJ70101
  • Engine drain plug Torque: 30 NM (3.1 kgf-m  22lbf-ft)
  • Engine Oil Type: SAE 10-W30
  • Manual Gearbox Engine Oil volume: 4.1L (4.3 US/qt   3.6 Imp/qt) (complete oil drain and filter change)
  • DCT Transmission Engine Oil volume: 4.2L (4.4 US/qt   3.7 Imp/qt (complete oil drain and filter change)
Engine Oil Level Check (From Honda Manual)
  • Place bike on side-stand
  • Start and allow to idle 3-5 minutes
  • Stop Engine and wait 2-3 minutes
  • Remove Dipstick and clean
  • Hold bike upright on level ground
  • Insert Dipstick until it seats (but do not screw in)
  • Remove Dipstick and check oil level - should be between upper and lower level lines.
  • Remove Oil Filler cap and top up if required
  • Engine Oil Type: SAE 10-W30
regards
James Mc
Honda-Adventure-Riders

Current: 2017 CRF1000L DCT
Current: 2008 Triumph Tiger 1050
Previous: 2003 Honda Varadero XL1000V (bought 2003, sold 2013 - Sadly left behind in Europe)

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal